10 November 2026

What count 100 means and how to write a fruit spec

Apple counts, size grades and box weights explained for trade buyers, with a practical template for writing a fruit specification that any supplier will read the same way.

Red Washington apples stacked together, showing even size and colour

"Send 20 boxes of count 100" sounds precise. In practice it can produce two very different deliveries, because a count only means something when everyone agrees on the box it refers to. This post explains where counts come from, how they map to fruit size, and how to write a specification that leaves no room for a second reading.

Where the count system comes from

A count is the number of fruits that fill a standard container. The lower the number, the bigger each fruit. In the United States, apples are traditionally packed in tray layers in a box of about 40 lb (roughly 18 kg). A Washington State Department of Agriculture reference chart lists the common counts for that box and the approximate diameter each one stands for:

Count per 40 lb box

Approx. diameter (as published)

Approx. in mm

72

3 1/2 in

89 mm

88

3 1/4 in

83 mm

100

3 1/8 in

79 mm

113

3 in

76 mm

125

2 7/8 in

73 mm

138

2 3/4 in

70 mm

150

2 5/8 in

67 mm

163

2 1/2 in

64 mm

The millimetre column is a simple conversion for convenience. The same chart carries a useful warning: it is a rough reference, and buyers should confirm with the grower or vendor what they are actually packing.

The same logic applies to other fruit. The WSDA chart lists pears at counts from 70 to 150, with 110 and 135 described as medium sizes. Citrus, kiwifruit and stone fruit are traded by count too, each with its own container.

Why "count 100" is not one size in India

Indian apple trade uses counts and size names, but the box behind them has changed. A quality specification published by the Small Farmers' Agri-Business Consortium (SFAC) for Kisan Mandi lists six grades for Himachal apples, each with a count and diameter band:

Grade

Count

Diameter

Extra Large

80

above 85 mm

Large

100

75 to 80 mm

Medium

125

70 to 75 mm

Small

150

65 to 70 mm

Extra Small

175

60 to 65 mm

Pittoo

200

50 to 60 mm

The same document gives a different system for Jammu and Kashmir apples, using "4 layer" and "5 layer" grades rather than these six names.

Packaging has also shifted. Himachal Pradesh moved apple sales to weight in the 2023 season and in April 2024 notified a 20 kg universal carton, replacing telescopic cartons that, according to reporting in The Tribune, could be stretched to hold 35 to 36 kg. A count printed on one carton type does not translate neatly to another, and growers' associations raised concerns about how freight would be charged when more boxes are needed.

So "count 100" could mean a US-style 18 kg layered box, a traditional Himachal box, or a new universal carton. Each implies a different fruit size. The fix is simple: never send a count on its own.

What international standards measure

The Codex Alimentarius standard for apples (CXS 299-2010) sets size by the maximum equatorial diameter or by the weight of each fruit. Its baseline is 60 mm or 90 g, with smaller fruit allowed only if sweetness meets at least 10.5° Brix and size stays above 50 mm or 70 g.

Codex also defines how even a pack must be. Where fruit is packed to a size:

  • by diameter, the gap between the smallest and largest apple in a package should be no more than 5 mm when the smallest is under 80 mm, and no more than 12 mm when it is 80 mm or larger
  • by weight, the allowed spread rises with fruit size, from 15 g for the smallest fruit up to 50 g for apples over 300 g

The standard allows 10% by number or weight of apples in a lot not meeting the size shown on the package. Loose-packed fruit has no uniformity rule at all, which matters if you buy in bulk crates.

Codex also sets three quality classes (Extra, Class I and Class II) and optional colour codes for red varieties, from A (75% or more of the surface coloured) to D (under 25%). These are useful words to borrow even when you are not importing.

How to write a fruit spec your supplier cannot misread

A good specification states the measurement, not just the label. For apples and similar fruit, cover these lines:

  1. Variety and origin. "Royal Delicious, Himachal" or "Red Delicious, Washington". Different varieties pack differently even at the same count.
  2. Size as a measurement. Give a diameter band in millimetres (for example 70 to 75 mm) or a weight band per fruit in grams. Add the count only as a cross-check, and always name the box it refers to.
  3. Pack format and net weight. Box type, net weight per box, number of layers or trays, and whether fruit is tray-packed or loose.
  4. Uniformity. The maximum spread you will accept within one box, in mm or grams.
  5. Quality class. Use plain terms such as "Class I as per Codex" or your own defect list.
  6. Colour. A percentage of surface colour, or a Codex-style code, for red varieties.
  7. Firmness or maturity. If you need a pressure reading, ask for it. The SFAC specification, for instance, links Grade I Himachal apples to fruit pressure above 17 lb.
  8. Defect limits. Bruising, hail marks, russet, cuts, shrivel and decay, each with a tolerance. Decay should normally be zero at receipt.
  9. Tolerance and sampling. What share of off-size or off-grade fruit you will accept, and how you will sample to check it.
  10. Labelling. Variety, size, class, packer and pack date on every carton, which Codex also expects on non-retail containers.

A sample spec line

Apples, Royal Delicious, Himachal. Diameter 70 to 75 mm, maximum 5 mm spread per box. Class I. Minimum 75% red colour. Pressure above 15 lb. 20 kg universal carton, tray-packed. No decay, cuts or punctures; bruising and hail marks under 2% by count. Size tolerance 5% by count. Each carton labelled with variety, size band, pack date and packer.

This reads the same to a farmer, a packhouse, an importer and a dock supervisor. If a delivery fails, everyone can see which line it failed on.

How to use this at the dock

When cartons arrive, take a few from different pallets, measure ten fruits from each with a simple sizing ring or calliper, and weigh a sample. If most fruits sit inside your band and the spread inside each box matches your spec, the count printed on the box becomes almost irrelevant. If they do not, you have a measurable reason to raise it with the supplier on the same day.

It also helps to agree with your merchandising team which size they actually need. Quick-commerce packs sold by piece usually want tight uniformity. Hotels may prefer a particular size for presentation. Juice counters may be happy with smaller, sweeter fruit. Paying for Extra Large when Medium sells just as well is a choice, not a default.

Questions to ask any supplier

  • Which box and net weight does your count refer to?
  • Do you grade by diameter, weight or both, and on what equipment?
  • What spread do you allow within one carton?
  • How do you handle a lot that falls outside the band?
  • Can you share photographs of sizing from today's pack?

If you would like to set up a specification for apples or any other fruit, or see what is available today in the sizes you need, send us your requirement through the contact page and we will come back with options and a quote.

Sources

  • Washington State Department of Agriculture, Standard Pack Size: Weight-Count Converter Chart for Fruit. https://cms.agr.wa.gov/WSDAKentico/farm-to-school/7-2_WA-grown_Fruit_Pack_Size_Table_1.pdf
  • Codex Alimentarius, Codex Standard for Apples (CODEX STAN 299-2010), FAO/WHO. https://www.fao.org/input/download/standards/11509/CXS_299e.pdf
  • Small Farmers' Agri-Business Consortium (SFAC), Fruit Quality Specifications for Kisan Mandi: Apple, Banana, Kinnow, Orange. https://sfacindia.com/PDFs/Fruit%20Quality%20Specs-Kisan%20Mandi_Apple_Banana_Kinnow-Orange.pdf
  • The Tribune, Universal carton for apples from this season (25 April 2024). https://www.tribuneindia.com/news/himachal/universal-carton-for-apples-from-this-season-614727
WhatsApp